EMC DS-32B2, ED-12000B diagretry

1-120 EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual

Telnet Commands

diagretry

Enable or disable retry mode.

Syntax diagretry [mode | -show]

Availability Admin

Description Use this command to enable or disable retry mode. The mode is

saved in nonvolatile memory and stays in that mode until the next

execution of diagretry.

The mode becomes active as soon as this command is executed. It

does not require a reboot to take effect.

When enabled, retry mode modifies the behavior of the diagnostic

test methods, POST, and burn-in scripts. The exact behavior

depends on the tests and scripts that are run, but the most common

result is that spinsilk tests are skipped when retry mode is enabled.

Operands This command has the following operands:

If no operand is specified, the current value is displayed.

Example To view the current retry mode value:

switch:admin> diagretry

Retry disable mode is 0 (Enabled).