1
perfDelFilterMonitor 1-297
Telnet Commands
perfDelFilterMonitor
Delete a filter-based monitor.
Syntax perfDelFilterMonitor [slotnumber/]portnumber[,
monitorId]
Availability Admin
Description Use this command to delete a filter-based monitor.
After a successful execution of this command, the telnet shell
confirms that this monitor has successfully been deleted. Prior to
issuing this command, verify all the valid monitor numbers and
user-defined aliases on a specific port using the
perfShowFilterMonitor command to make sure that the right
monitor will be deleted.
This command requires a Performance Monitoring license.
Operands This command has the following operands:
slotnumber Specify the slot number in an ED-12000B
switch. The slot number must be followed by a
slash ( / ) and the port number.
The ED-12000B has a total of 10 slots counted
from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4 and 7
through 10 are switch cards. On each switch
card, there are 16 ports counted from the
bottom 0 to 15. A particular port must be
represented by both slot number (1 through 4
or 7 through 10) and port number (0 through
15).
This operand is not required for switches that
do not have blades.