1
1-306 EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
Operands This command has the following operands:
slotnumber Specify the slot number in an ED-12000B
switch. The slot number must be followed by a
slash ( / ) and the port number.
The ED-12000B has a total of 10 slots counted
from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4 and 7
through 10 are switch cards. On each switch
card, there are 16 ports counted from the bottom
0 to 15. A particular port must be represented
by both slot number (1 th rough 4 or 7 through
10) and port number (0 through 15).
This operand is not required for switches that
do not have blades.
portnumber Specify the port number where you want to
display the end-to-end traffic. Valid values for
port numbers vary depending on the switch
type. This operand is required.
interval Specify an interval in seconds. This operand is
optional.