1
savecore 1-389
Telnet Commands
savecore
Save or remove core files created by daemons.
Syntax savecore
Availability Admin
Description Use this command to transfer (by way of FTP) or remove core files
that were created by daemons during signal processing such as
SIGSEGV, SIGILL, etc. This command is menu driven so no operands
are required.
Operands None
Example To remove core files from the current switch:
switch:admin> savecore
Welcome to core files management utility.
Menu
1. Remove core files
2. Ftp these files to a host
Your choice: 1
No core files found!
switch:admin>
See Also diagHelp