1
fazoneRe move 1-157
Telnet Commands
fazoneRemove
Remove members from a Fabric Assist mode zone.
EMC does not support this command.
Syntax fazoneRemove “fazoneName”, “member; member”
Availability Admin
Description Use this command to remove one or more members from an existing
Fabric Assist zone.
Each deleted member must be found by an exact string match. Order
is important when removing multiple members of a Fabric Assist
zone. For example, if a Fabric Assist zone contains “array2; array3;
array4” then removing “array4; array3” fails, but removing “array3;
array4” succeeds. If issuing this command results in all members
being removed, the Fabric Assist zone is deleted.
This command does not change the defined configuration (which you can
view using the cfgShow command) until the cfgSave command is issued.
For the change to become effective, an appropriate Fabric Assist zo ne
configuration must be enabled using the cfgEnable command. For the
change to be preserved across switch reboots, it must be saved to nonvolatile
memory using the cfgSave command.