EMC DS-32B2, ED-12000B Example , See Also

1

perfShowEEMonitor 1-307

Telnet Commands

Example To display end to end monitor frame traffic on blade 4, port 5 at an

interval of every 6 seconds:

switch:admin> perfShowEEMonitor 4/5, 6

perfShowEEMonitor 4 1: Tx/Rx are # of bytes and crc is # of crc errors

0 1 2 3 4

------------ ------------- ------------- ------------- -------------

crc Tx Rx crc Tx Rx crc Tx Rx crc Tx Rx crc Tx Rx

============= ============= ============= ============= =============

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

0 53m 4.9m 0 53m 4.9m 0 53m 4.9m 0 53m 4.9m 0 53m 0

0 53m 4.4m 0 53m 4.4m 0 53m 4.4m 0 53m 4.4m 0 53m 0

0 53m 4.8m 0 53m 4.8m 0 53m 4.8m 0 53m 4.8m 0 53m 0

0 53m 4.6m 0 53m 4.6m 0 53m 4.6m 0 53m 4.6m 0 53m 0

0 53m 5.0m 0 53m 5.0m 0 53m 5.0m 0 53m 5.0m 0 53m 0

0 53m 4.8m 0 53m 4.8m 0 53m 4.8m 0 53m 4.8m 0 53m 0

0 53m 4.5m 0 53m 4.5m 0 53m 4.5m 0 53m 4.5m 0 53m 0

0 52m 4.5m 0 52m 4.5m 0 52m 4.5m 0 52m 4.5m 0 52m 0

0 52m 5.0m 0 52m 5.0m 0 52m 5.0m 0 52m 5.0m 0 52m 0

0 52m 4.5m 0 52m 4.5m 0 52m 4.5m 0 52m 4.5m 0 52m 0

0 52m 4.6m 0 52m 4.6m 0 52m 4.6m 0 52m 4.6m 0 52m 0

To display EE monitors on blade 4, port 5:

switch:admin> perfShowEEMonitor 4/5

There are 7 end-to-end monitor(s) defined on port 5.

KEY SID DID OWNER_APP OWNER_IP_ TX_COUNT RX_COUNT CRC_COUNT

ADDR

---------------------------------------------------------------------------------------------------

0 0x21300 0x21dda TELNET N/A 0x00000004d0ba9915 0x0000000067229e65 0x0000000000000000

1 0x21300 0x21ddc TELNET N/A 0x00000004d0baa754 0x0000000067229e65 0x0000000000000000

2 0x21300 0x21de0 TELNET N/A 0x00000004d0bab3a5 0x0000000067229e87 0x0000000000000000

3 0x21300 0x21de1 TELNET N/A 0x00000004d0bac1e4 0x0000000067229e87 0x0000000000000000

4 0x21300 0x21de2 TELNET N/A 0x00000004d0bad086 0x0000000067229e87 0x0000000000000000

If you do not specify an interval the EE-based monitor traffic count is

displayed in 64-bit format and is cumulative.