Enterasys Networks 6000, Matrix E7 Managing the Module 2-105

Managing the Module 2-105
The Device View
1. Click on the appropriate port display box to display the port menu.
2. Drag down to select Enable to enable bridging at the interface, or Disable to
disable bridging. Bridging will now be enabled or disabled across the selected
port, as desired.
To enable or disable bridging for all interfaces installed on the monitored SmartSwitch
6000 or Matrix E7 module:
1. Click on the module index of interest to display the Module menu.
2. Drag down to select Enable Bridge to enable bridging at all installed
interfaces, or Disable Bridge to disable bridging across all interfaces.
Bridging will now be enabled or disabled across the installed interfaces, as
desired.
NOTE For more information about bridging functions and how to determine the current state of
each bridge port, see the Bridging chapter in the Element Manager Tools Guide.