Enterasys Networks 6000, Matrix E7 Setting the Device Date and Time, Enabling or Disabling Gmrp

The Device View

Enabling or Disabling GMRP

To enable or disable GMRP on each port:

1.Select the port in the table or use the drop-down list in the Port field and select the desired port.

2.Use the drop-down list in the GMRP Status field and select the desired action: Enable or Disable.

3.Click the Apply button to set the changes.

Updating Port GMRP Information

Clicking the Refresh button will update the information displayed in the Port GMRP table without closing the

window.

Setting the Device Date and Time

The Device menu provides the options that allow you to change the date and time stored in the device’s internal clock: Edit Device Time and Edit Device Date.

To edit the device time:

1.Click on Device on the Device View menu bar to access the Device menu. Click on Edit Device Time.

2.The Device Time change window, Figure 2-37, will appear.

Figure 2-37. The Device Time Window

3.Enter the new time in a 24-hour hh:mm:ss format, either by highlighting the field you wish to change and using the up and down arrow buttons, or by simply entering the new value in the appropriate field.

4.Click on the OK button to save your changes, or on the Cancel button to exit without changes.

Managing the Module 2-103