Enterasys Networks Matrix E7, 6000 manual Configuring Traffic Classes, GMRP, and Gvrp

The Device View

Configuring Traffic Classes, GMRP, and GVRP

In the Bridge Configuration window, you can enable or disable Traffic Classes, GMRP and GVRP (if supported) at the device-level:

1.Use the drop-down list in the Traffic Classes Desired field and select Enable or Disable.

2.Use the drop-down list in the GMRP Desired field and select Enable or Disable.

3.Use the drop-down list in the GVRP Desired field and select Enable or Disable.

4.Click on the Apply button to set the changes, or the Cancel button to close the Bridge Extension Configuration window without incorporating any changes.

Setting VLAN Parameters and Operational Modes

The VLAN Configuration window allows you to view, create, modify, delete, enable, and disable VLANs on the module. To launch the window:

1.In the Device View, select Bridge Extension Configuration... from the Device menu.

2.In the Bridge Extension Configuration window, click on the VLAN button and select VLAN Configuration... from the menu. The VLAN Configuration window, Figure 2-25, appears.

2-84 Managing the Module