Enterasys Networks 6000 manual Configuring Port Garp Times, Updating Port Garp Times Information

The Device View

Configuring Port GARP Times

To configure port GARP times:

1.Select the port in the table or use the drop-down list in the Port field and select the desired port.

2.In the Join Time field, enter the amount of time in centiseconds.

3.In the Leave Time field, enter the amount of time in centiseconds.

4.In the Leave All Time field, enter the amount of time in centiseconds.

5.Click the Apply button to set the changes.

Updating Port GARP Times Information

Clicking the Refresh button will update the information displayed in the Port GARP Times table without closing the window.

Configuring GMRP Status

Use the Bridge Extension Port GMRP window to configure whether GMRP (GARP Multicast Registration Protocol) is enabled or disabled on each port. GMRP is a protocol used to register multicast addresses on ports to control flooding of multicast frames.

NOTE

Matrix E5 modules do not currently support GMRP.

To launch the window:

1.In the Device View, select Bridge Extension Configuration... from the Device menu.

2.In the Bridge Extension Configuration window, click on the Priority button and select GMRP... from the menu. The Bridge Extension Port GMRP window, Figure 2-36, appears:

Managing the Module 2-101