Repeater Statistics 5-5
Managing Ethernet MicroLAN Modules
Using the Total and Delta Option Buttons
By using the Tota l and Delta option buttons located at the bottom of the Statistics
windows, you can choose whether to view the total statistics count (Tot al) or the statistics
count for the last polling interval (Delta).
To choose Total or Delta:
1. Click on the Total option button; after the completion of the current polling
cycle plus one complete polling cycle, the window will display the total count
of statistics processed since the most recent start-up of the Ethernet
MicroLAN module.
2. Click on the Delta option button; after the completion of the current polling
cycle plus two more polling cycles, the window will display the count of
statistics processed during the last poll interval. These counts will be
refreshed after each polling interval.
NOTE
For more detailed definitions of these statistics and information on the possible network
conditions they represent, consult the Enterasys Network Troubleshooting Guide,
included with this package.
TIP
The statistics windows use the polling interval you have set for the monitored device via
the Device Management page of the Options window, which is launched from the Tools
menu in the NetSight Element Manager primary window menu bar. See your Element
Manager User’s Guide for more information on setting the Chassis Manager polling
interval.