Enterasys Networks 6000, Matrix E7 manual Number of Entries, IP Priority Queue Status

HSIM-W87 Configuration

Number of Entries

Displays the number of Priority IP addresses currently configured. This number will change each time you add or delete an IP address in the list box.

Below these two fields is a list box displaying the currently configured IP Priority Addresses. Each address is automatically assigned an Address ID when it is configured. The lower the ID number, the higher the priority.

IP Priority Queue Status

This read-only field gives you the status (Enabled or Disabled) of IP Priority configuration. You can change the status using the Enable or Disable buttons.

To configure IP Priority addresses:

1.In the IP Address field, enter the IP Address you want to configure in the appropriate X.X.X.X format.

2.Click the Add button to add the IP Address to the list box. Remember, you can configure a maximum of 16 IP addresses.

3.To delete an IP address, click to highlight the desired IP address in the list box and click the Delete button.

4.To enable or disable IP Priority Address configuration, click on the Enable or Disable button (in the IP Priority Queue Toggle section) as desired. The current status is displayed in the IP Priority Queue Status field.

Configuring IP Priority 8-7