Alarm Configuration
4-4 Basic Alarm Configuration
Figure4-1. Basic Alarm Configuration Window
•Tota l Er rors (ifInErrors) — tracks the number of error packets received by the
selected interface.
•Broadcast/Multicast (ifInNUcastPkts) — tracks the number of non-unicast — that is,
broadcast or multicast — packets received by the selected interface.
Port Number
Provides a sequential indexing of the interfaces installed in your RMON device.
IF Number
Displays the interface number assigned to each available interface.
TIP
Note that the three pre-selected alarm variables are all MIB II variables; this allows you
to configure alarms for any installed interface — even those for which no specific RMON
statistics yet exist.