4.Push the cartridge into the slot until it snaps into position. You should hear a beep and see confirmation that the cartridge has been inserted.

If you have difficulty, see Cannot insert an ink cartridge on page 159.

5.When all cartridges have been inserted, close the cover.

6.The front-panel display confirms that all cartridges have been correctly inserted, press the OK key on the front panel.

About the printheads

The printheads are connected to the ink cartridges and jet ink onto the paper.

CAUTION: Observe precautions when handling printheads because they are ESD-sensitive devices (see the Glossary on page 183). Avoid touching pins, leads and circuitry.

Check printhead status

The printer automatically checks and services the printheads after each print. Follow the steps below to get more information on your printheads.

1.In the front panel, select the Ink menu icon , then Printhead information.

2.Select the printhead on which you want information.

3.The front panel displays information about that printhead.

You can also get most of this information without leaving your computer by using the HP Utility.

For an explanation of the printhead status messages, see Printhead status messages on page 165.

Ink and printheads

ENWW

About the printheads 109