3.Open the CD icon on your desktop.

4.Open the Mac OS X HP Designjet Installer icon.

5.Follow the instructions on your screen. You are recommended to use the Easy Install option, which will install the PCL3 (raster) printer driver. If you would like to install the PostScript driver, select Custom Installation.

6.The printer software is installed, including the printer driver and the HP Utility.

7.When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up a connection to your printer. Follow the instructions on your screen.

8.When you reach the Select Printer screen, look for your printer's mDNS service name (which you noted in step 1) in the Printer Name column.

If you find the right printer name, scroll sideways to see the Connection Type column, and check that it shows Bonjour/Rendezvous. Then highlight that line. Otherwise, continue searching further down the list.

If you cannot find your printer name with a Bonjour/Rendezvous connection type, check the box My printer is not in the list.

Click Continue.

Software installation

ENWW

Connect to a network (Mac OS) 13

Page 23
Image 23
HP Z5200 CQ113A#B1K manual Open the Mac OS X HP Designjet Installer icon, Click Continue