9.Using the blue handle, use steady force to disengage the printhead.

Ink and printheads

10.Pull the blue handle upward until the printhead is released from the carriage.

CAUTION: Do not pull abruptly because this can damage the printhead.

11.The front-panel display identifies the missing printhead.

Insert a printhead

1.If the printhead is new, shake the printhead vigorously before removing the protective caps.

2.Remove the orange protective caps by pulling them down.

3.The printhead is designed to prevent you from accidentally inserting it into the wrong slot. Check that the colored label on the printhead matches the colored label of the carriage slot into which the printhead is to be inserted.

112 Chapter 9 Handling ink cartridges and printheads

ENWW

Page 122
Image 122
HP Z5200 CQ113A#B1K manual Insert a printhead