Chapter 6 HPSS Configuration
HPSS Installation Guide September 2002 273
Release 4.5, Revision 2
Principal Name The DCE principal name
defined for the server
during the infrastructure
configuration phase.
The principal name must
exist in the DCE registry. BFS: hpss_bfs
DMG:
hpss_dmg
GK: hpss_gk
Log Client: hpss_log
Log Daemon:
hpss_log
LS: hpss_ls
MMON: hpss_mmon
Mount Daemon:
hpss_mountd
MPS: hpss_mps
MVR: hpss_mvr
NDCG: hpss_ndcg
NS: hpss_cns
NFS Daemon:
hpss_nfs
PVL: hpss_pvl
PVR: hpss_pvr
SS: hpss_ss
SSM: hpss_ssm
Startup Daemon:
hpss_hpssd
Advice:Ensure that the key table named by the Keytab Pathname field contains
an entry for this principal; otherwise, authentication will fail.
Protection Level The amount of encryption
that will be used in
communication with peer
applications.
Default,
None,
Connect,
Call,
Packet,
Packet Integrity,
Packet Privacy
Connect
Advice: The higher the level of protection, the more encryption and overhead
required in communications with peers. A level ofNone corresponds to no
authentication and no authorization. The minimum suggested level isConnect.
Refer to the description of the DCE Protection Levels included in the
rpc_binding_set_auth_info call in the OSF/DCE Application Development
Reference Manual.
Table 6-3 Basic Server Configuration Variables (Continued)
Display Field Name Description Acceptable Values Default
Value