Chapter 6 HPSS Configuration
HPSS Installation Guide September 2002 373
Release 4.5, Revision 2
6.8.13 Configure the PVR Specific Information
ThePVR specific configuration entry can be created using the PVR Server Configuration window.
After the configuration entry is created, it can be viewed, updated, or deleted through the same
window.
If you are configuring a PVR for StorageTek, IBM 3494/3495/3584, or ADIC AML; before
proceeding with PVR configuration you should read the PVR-specific section (Section 6.8.13.4:
StorageTekPVRand RAIT PVR Information on page 389,Section 6.8.13.3: IBM 3494/3495 PVR
Information on page 388, Section 6.8.13.2: LTO PVR Information on page 387, and Section
6.8.13.5:ADIC Automatic Media Library Storage Systems Information on page 392). These sections provide
additional vendor-specific advice on PVR/robot configuration.
The STK RAIT PVR cannot be supported at this time since STK has not yet made RAIT
generally available.
Fromthe HPSS Health and Status window (shown in Figure 6-1), click on the Admin menu, select
theConfigure HPSS option and click on theServers option. The HPSS Servers window will be
displayed as shown in Figure 6-5.
To add a new specific configuration, select the PVR Server entry and click on theType-specific...
button from theConfiguration button group on the HPSS Servers window. The PVR Server
Configurationwindow will be displayed (as shown in figures 6-33 through 6-39) depending on the
selectedPVR type) with default values. If the default data is not desired, change the fields with the
desired values. Click on theAdd button to create the configuration entry.
Toupdate an existing configuration, select the PVR Server entry on the HPSS Servers window and
click on theType-specific... button from the Configuration button group. The PVR Server
Configuration window will be displayed with the configured data. After modifying the
configuration, click on theUpdate button to write the changes to the appropriate SFS file.
To delete an existing configuration, select the PVR Server entry on the HPSS Servers window and
click on theType-specific... button from the Configuration button group. The PVR Server
Configuration window will be displayed with the configured data. Click on theDelete button to
delete the specific configuration entry.
Referto the window’s help file for more information on the individual fields and buttons as well as
the supported operations available from the window.