Appendix G High Availability
556 September 2002 HPSS Installation Guide
Release 4.5, Revision 2
G.4.3.5 Synchronize the Cluster Topology
By this point in the configuration, you should have given HACMP all the information it needs
about the topology of your networks. However, only one of the nodes has this configuration
information,and it needs to be on both nodes. So, it’s time to synchronize the cluster topology. See
Section G.10.4.1: Synchronize Topology on page 573 for instructions.:
G.4.3.6 Define the resource groups
To define a resource group, associate the name of the resource group with its type and the nodes involved.
% smitty hacmp
Cluster Configuration
-> Cluster Resources
-> Define Resource Groups
-> Add a Resource Group
Figure H-10 Adding a Resource Group
G.4.3.7 Assign Resources to the Resource Group
% smitty hacmp
Cluster Configuration