Chapter 6 HPSS Configuration
322 September 2002 HPSS Installation Guide
Release 4.5, Revision 2
6.7.4 File Family Configuration
File family information must be created for each file family that is to be supported by the HPSS
system. A file family can be created using the File Family Configuration window. After the
configuration entry is created, it can be viewed, updated, or deleted through the same window.
Fromthe HPSS Health and Status window (shown in Figure 6-1), click on the Admin menu, select
theConfigure HPSS option and click on theFile Families option.
The File Family Configuration window will be displayed as shown in Figure 6-19. The fields are
displayed with default values for a file family. If the default data is not desired, change the fields
with the desired values. Click on theAdd button to create the configuration entry.
Toupdate an existing file family, select the Load Existing button on the File Family Configuration
windowand select the desired family from the popup list. The window will be refreshed with the
configured data. After modifying the data, click on theUpdate button to write the changes to the
SFS file.
To delete an existing file family, select theLoad Existing button on the File Family Configuration
windowand select the desired family from the popup list. The window will be refreshed with the
configured data. Click on theDelete button to delete the configuration.
Referto the window’s help file for more information on the individual fields and buttons as well as
the supported operations available from the window.
Figure 6-19 File Family Configuration Window