Appendix G High Availability
HPSS Installation Guide September 2002 557
Release 4.5, Revision 2
-> Cluster Resources
-> Change/Show Resources/Attributes for a Resource Group
[HPSSResourceGroup]
Thereare only three fields that need to be filled in on the SMIT screen at this time: Service IP Label,
Filesystems, and Volume Groups. Special care should be taken to ensure that all shared file
systems and volume groups are listed (it’s usually easy if you use the F4 pick lists):
Figure H-11 Configuring a Resource Group
G.4.3.8 Synchronize Cluster Resources
By this point in the configuration, you should have given HACMP all the information it needs
aboutyour resource group. However,only one of the nodes has this configuration information, and
itneeds to be on both nodes. So, it’s time to synchronize the cluster resources. See Section G.10.4.2:
Synchronize Resources on page 573 for instructions.