Cache Coherency Filters: Removing and Installing
Removing the Cache Coherency Filters
See Figure 43.
1.Observe the safety and ESD precautions at the beginning of this chapter.
2.Remove the Mezzanine Extraction Tool/Cache Hold Down bracket from the front of the processor retention bracket by pulling out the plastic retaining pin.
3.Press down on the retaining latch, and pull the filter up and out of the connector.
A
B
OM10691
Figure 43. Removing the Cache Coherency Filters
A.Retaining latch
B.Keyed/notched edge
132 | Upgrading Boardset Components |
