IDE Submenu, Auto Disabled, Standard | Intel SRPL8 guide

IDE Submenu

Default values are in bold typeface.

Feature

Type

Cylinders

Heads

Sectors

Maximum Capacity

Multisector Transfers

LBA Mode Control

32-bit I/O

Transfer Mode

Ultra-DMA Mode

Option

None

CD-ROM

IDE Removable

ATAPI Removable

User

Auto

Disabled

2sectors

4sectors

8sectors

16sectors

Disabled

Enabled

Disabled

Enabled

Standard

Fast PIO 1

Fast PIO 2

Fast PIO 3

Fast PIO 4

Disabled

Mode 0

Mode 1

Mode 2

Description

If "Auto" is selected, BIOS determines the parameters during POST.

If "User" is selected, BIOS Setup prompts the user to fill in the drive parameters. Drive types 1 through 39 are predetermined drive types.

Displays the number of cylinders.

Displays the number of read/write heads.

Displays the number of sectors per track.

Displays the capacity of the drive.

Displays status of multisector transfers. Autotyped by BIOS.

Displays status of Logical Block Access. Autotyped by BIOS.

Enables 32-bit IDE data transfers.

Selects the method for transferring data to/from the drive. Autotyped by BIOS.

Selects the Ultra-DMA mode used for transferring data to/from the drive. Autotyped by BIOS.

SRPL8 Server System Product Guide

39

Image 39

Intel SRPL8 manual IDE Submenu, Auto Disabled, Standard

Contents

SRPL8 Disclaimer Contents Configuration Software and Utilities Working Inside the System Hot-Swapping Fans, Scsi Hard Drives, and Power Supplies Upgrading Boardset Components Solving Problems Technical Reference Power System Description/Calculating Power UsageEquipment Log and Configuration Worksheets Regulatory Specifications 210 Contents Part I User’s Guide Part 1 User’s Guide Value Server Physical SpecificationsSpecification Chassis Description Comment Chassis Feature SummaryChassis Feature Summary Feature Front Controls and Indicators Chassis Front Controls and Indicators Inch Diskette Floppy Drive Item Feature Front Panel DescriptionStatus LEDs for Scsi Drives in Hot-swapping Bays Typical CD-ROM Drive Chassis Back View Chassis Back Controls and Features Inch Removable Media Device Bay PeripheralsInch Diskette Drive Inch Hard Drive Bays System Cooling Hot-Swap Power Supplies Chassis Description Boardset Description Boardset Features Boardset Features Boardset Features Processor Overview Memory Overview Dimm Installation Sequence Serial Ports Add-In Board SlotsVideo Super I/O Chip Scsi Controller IDE ControllerKeyboard and Mouse Server Management Hot-swap Controller HSC Front Panel Controller FPC System Security Password ProtectionSecure Boot Mode Boot Sequence Control Video Blanking Boot Without KeyboardLocked Power and Reset Switches Diskette Write Protect Utility Configuration Software and UtilitiesConfiguration Utilities Description and brief procedure To do this Power-on Self Test PostHot Keys Hot Keys Using Bios Setup Record Your Setup SettingsIf You Cannot Access Setup What it means Starting SetupSetup Menus When you see this ESC Press 44/1.25 MB, 3 ½ DisabledMain Menu Option Auto Disabled IDE SubmenuStandard Processor Information Submenu Keyboard Features Submenu Enabled Advanced MenuMin PCI Configuration Submenu PCI0080h Bidirectional Device Configuration Submenu3F8h 2F8h Advanced Chipset Control Submenu Enabled Disabled Clear Security Menu Direct Connect Server Menu System Management Submenu 9600 K Option DisabledConsole Redirection Submenu Option Description Boot Menu Exit Menu When to Run the SSU Using the System Setup Utility SSU Running the SSU Remotely What You Need to DoRunning the SSU Running the SSU Locally Bios Console Redirection SSU Main Window Starting the SSU Customizing the SSU To change the interface default values Resource Configuration Add-In RCA Window Launching a TaskModifying Resources Security Add-In Multiboot Options Add-In To Change or Clear the Administrator Password System Event Log SEL Viewer Add-InSecurity Options Options Menu SDR Manager Main Window Sensor Data Record SDR Manager Add-In SDR Manager Menus Field Replaceable Unit FRU Manager Add-In FRU Manager Main Window FRU Manager Menus Direct Platform Control DPC Console Exiting the SSUHow the DPC Console Works DPC Console in Command State Mode Server is powered offAfter OS boots DPC Console Requirements Server Menu Setting Up the Server for the EMP DPC Console Main Menu Main DPC Console WindowToolbar Status Bar Server Control Operations Connecting to Remote Server Power On/Off Dialog Powering the Server On/Off Remotely Reset Dialog Resetting the Server Remotely Phonebook Dialog Phonebook FRU and SDR Load Utility Management Plug-InsField Replaceable Unit FRU Viewer Command When to Run the Frusdr Load UtilityCommand Line Format Command Line Format Displaying Usage Information Parsing the Command Line Displaying a Given Area Using Specified CFG File Configuration File Cleaning Up and Exiting Obtaining the Upgrade Utility Upgrading BiosPreparing for the Upgrade Recording the Current Bios Settings Creating the Bios Upgrade Diskette Upgrading Bios Changing Bios Language Recovering Bios Running the Firmware Update Utility Using the Firmware Update UtilityInstalling Video Drivers Using the QLogic Scsi Utility Hot-Swapping Fans, Scsi Hard Drives, and Power Supplies Tools and Supplies NeededEquipment Log Hot-Swapping Fans Removing a FanReplacing a Fan Removing/Hot-swapping a Fan Mounting a Scsi SCA Hard Disk Drive in a Carrier Hot-Swapping a Scsi Hard DriveHot-Swapping Bays Scsi SCA Hard Disk Drives Mounting Hard Disk Hard Disk Drive and Carrier Installing a Hard Disk Drive Installing a Scsi SCA Hard Disk Drive in a Hot-Swapping Bay Determining Drive Status Scsi Drive Status LED DescriptionsDescription and action if needed Hot-Swapping a Power Supply Hot-Swapping Power Supplies Removing a Power Supply Removing a Power Supply Replacing a Power Supply Part II Service Technician’s Guide Part II Service Technician’s Guide Safety Before You Remove Server Covers Procedures in ChapterWorking Inside the System Working Inside the System Removing the Front Bezels Removing and Installing the Front Bezels Server Covers Removing and Installing Server Covers Removing the PCI Bus Hot-Plug Cover Installing the PCI Bus Hot-Plug Cover Removing the Top Cover Removing the Top Cover Removing the 240 VA Protective Cover Installing the Top Cover Removing the Memory Module Cover Installing the Memory Module Cover Fan Array Housing Removing the Fan Array HousingInstalling the Fan Array Housing Removing the LCD Module LCD Module Removing the LCD Module Installing the LCD Module Installing the Profusion Carrier Tray Profusion Carrier TrayRemoving the Profusion Carrier Tray Removing the Profusion Carrier Tray Installing the Front Panel Controller Board Front Panel Controller BoardRemoving the Front Panel Controller Board Front Panel Controller Board Add-In Boards Installing/Replacing an Add-In Board Enhanced PHP Functionality on Add-in Board Slots Installing an Add-in Board Riser Board Removing an Add-In BoardRemoving the I/O Riser Board O Riser Board Installing the I/O Riser Board Removing a PHP LED Board PHP LED Board Installing a PHP LED Board TrayRemoving the I/O Tray Removing the I/O Tray Installing the I/O Tray Installing the Icmb Board Interchassis Management Bus Icmb BoardRemoving the Icmb Board Removing the AC Filter and Cable Installing the AC Filter and CableAC Filter and Cable Peripheral Bay Peripheral Bay Installing the Peripheral Bay Removing the Peripheral Bay Backplane Peripheral Bay Backplane Peripheral Bay Backplane Installing the Peripheral Bay Backplane Removing the Peripheral Bay Blind Mate Board Peripheral Bay Blind Mate Board Peripheral Bay Blind Mate Board Peripheral Bay Blind Mate Board Cables Installing the Peripheral Bay Blind Mate Board Removing the Diskette Drive Diskette Drive Installing the Diskette Drive Peripheral Drives Installing a 5.25-inch Peripheral in the Front Bay Snap-in Plastic Slide Rails Removing a Media Device Removing a 5.25-inch Peripheral from the Front Bay Upgrading Boardset Components 130 Upgrading Boardset Components SRPL8 Server System Product Guide 131 Removing the Cache Coherency Filters Cache Coherency Filters Removing and Installing Installing the Cache Coherency Filters Removing the Processor Retention Bracket Processor Retention Bracket Removing and Installing Removing the Mezzanine Boards Mezzanine Boards Removing and InstallingInstalling the Processor Retention Bracket Installing the Mezzanine Boards Profusion Carrier Removing and Installing Installing the Profusion CarrierRemoving the Profusion Carrier PHP I/O Carrier Removing and Installing Removing the PHP I/O Carrier Installing the PHP I/O Carrier PHP I/O Carrier Midplane Removing and Installing Installing the MidplaneRemoving the Midplane Midplane Memory Modules and DIMMs Removing and Installing Installing a Memory ModuleRemoving a Memory Module Removing a Memory Module Removing DIMMs DIMMs Slot Layout Installing DIMMs Installing DIMMs Processors Removing and Installing Removing a Processor Holddown Removing a Processor Installing a Processor Installing a Processor Removing a Termination Board Front Side Bus FSB Termination Board Assembly Installing a Termination Board Assembly Installing a Termination Board Varning Replacing the Backup Battery Replacing the Lithium Battery 154 Upgrading Boardset Components Initial System Startup Solving ProblemsResetting the System Checklist After the System Has Been Running Correctly Running New Application Software More Problem-Solving Procedures Preparing the System for Diagnostic TestingUsing PCDiagnostics Confirming Loading of the Operating System Specific Problems and Corrective ActionsMonitoring Post Verifying Proper Operation of Key System Lights Power Light Does Not Light No Beep CodesNo Characters Appear on Screen Characters Are Distorted or Incorrect System Cooling Fans Do Not Rotate ProperlyDiskette Drive Activity Light Does Not Light CD-ROM Drive Activity Light Does Not Light Network ProblemsPCI Installation Tips Hard Disk Drive Activity Light Does Not Light Problems with Application Software Bootable CD-ROM Is Not DetectedError and Informational Messages Post Code Beeps ErrorPost Codes and Countdown Codes Port-80 Codes Post Code Beeps Error Port-80 Codes 166 Solving Problems Code Post Error Codes and MessagesPost Error Codes and Messages Error message 168 Solving Problems Post Error Codes and Messages 170 Solving Problems Technical Reference Profusion Carrier Layout Connectors O Carrier Layout Diskette Drive Connector Pinout Pin SignalDiskette Drive Intel Remote Management Card Irmc Connector Keyboard and Mouse Video Port Connector PinoutKeyboard and Mouse Connector Pinouts VGA Video Port Serial Ports a and B Parallel Port Connector PinoutSerial Port Connector Pinout Parallel Port USB Connector Pinout Wide Scsi Connector PinoutUniversal Serial Bus USB IDE IDE Connector Pinout PCI MHz, 64-bit PCI Connectors Slots a and B MHz, 64-bit PCI Connectors Slots C and D Disabled What it does at system reset Configuration SwitchesSwitch Default Setting Disabled Cmos Clear Switch General Procedure to Change Switch Settings Message Password Clear SwitchRecovery Boot Switch Beep Code Resource System I/O AddressesSystem I/O Addresses Address Amount Memory MapMemory Map Address Range Device PCI Configuration and Device MapInterrupts PCI Map PCI Bus InterruptsPID Interrupt PCI Interrupt Component/PCI Slot # Video Modes 190 Technical Reference Power System Power System Description/Calculating Power Usage Power Supply Output Ratings 110 V / 220 Power Supply Input VoltagesPower Supply Output Voltages Power Supply AC Input Ratings Server Boardset Voltages and Currents Server Current Usage Maximum Configuration Calculating Power UsageMinimum/Maximum Current Rating Configurations Minimum Configuration +12 Worksheet for Calculating DC Power UsageCurrent maximum at voltage levels Device +3.3 Total Combined Wattage = Total Combined Power Used by Your Server Equipment Log Equipment Log and Configuration Worksheets Manufacturer Name and Model Number Equipment Log Worksheet 1. Add/Remove Boards Configuration WorksheetsSSU Worksheets Add and Remove Boards System board SSU, Change Configuration Settings Worksheet 10. Console Redirection Worksheet 8. Multiboot GroupWorksheet 12. Scsi ROM Bios Options Group Worksheet 9. Keyboard and Mouse Subsystem Group Management Subsystem, System Sensor Control Worksheet Page Bios Setup Worksheets Worksheet 23. Server Menu Worksheet 20. I/O Device Configuration SubmenuWorksheet 21. Advanced Chipset Control Submenu Worksheet 22. Security Menu Worksheet 25. Console Redirection Submenu Worksheet 26. Boot MenuWorksheet 27. Boot Device Priority Submenu Worksheet 24. System Management Submenu Safety Compliance Regulatory SpecificationsRegulatory and Environmental Specifications Environmental Specifications USA Electromagnetic Compatibility EMC 209 210 Page Avertissement Français Avertissement Français suite Warnung Deutsch Warnung Deutsch Fortsetzung Avvertenza Italiano Avvertenza Italiano continua ∙ Dotata di una presa a muro correttamente installata Advertencias Español Advertencias Españolcontinúa 220 Index Bios Index IDE 224 Post Scsi VGA 228