Displaying a Given Area
When the utility is run with the
Displaying DMI Area
Each DMI area displayed is headed with the DMI area designated name. In each area, each field has a field name header followed by the field in ASCII or as a number.
Example:
To display the DMI area, type frusdr
Displaying FRU Area
The FRU area is displayed in ASCII format when the field is ASCII or as a number when the field is a number. Each FRU area displayed is headed with the FRU area designated name. Each field has a field name header followed by the field in ASCII or as a number. The board, chassis, and product FRU areas end with an END OF FIELDS CODE that indicates there are no more data in the area. The internal use area is displayed in hex format, 16 bytes per line.
Example:
To display the FRU area, type frusdr
Displaying SDR Area
The SDR nonvolatile storage area is displayed in the following hex format. The data are separated by a sensor record number X header, where X is the number of that sensor record in the SDR area. The next line after the header is the sensor record data in hex format delineated by spaces. Each line holds up to 16 bytes. The data on each line are followed by the same data in ASCII format; nonprintable characters (ch < 32 ch > 126) are substituted by a period (.).
Example:
To display the SDR area, type frusdr
Using Specified CFG File
The utility can be run with the command line parameter of
Displaying Utility Title and Version
The utility displays its title:
FRU & SDR Load Utility, Version X.X, Revision X.XX where X.XX is the revision number for the utility.
SRPL8 Server System Product Guide | 75 |