Processor Retention Bracket: Removing and Installing

Removing the Processor Retention Bracket

See Figure 44.

1.Observe the safety and ESD precautions at the beginning of this chapter.

2.Remove the memory module (page 142).

3.Remove the profusion carrier tray (page 104).

4.Remove the cache coherency filters (page 132).

5.Find the four metal latch verification brackets located on each side of the profusion carrier tray (two on each side).

6.To release the latches, pull up and out on each tab and expose the four plastic mezzanine lock bars (two on each side).

7.Release the plastic mezzanine lock bars by simultaneously squeezing the winged protruding end of the lock bar and pulling out and away from the profusion carrier tray.

8.Carefully lift the processor retention bracket from the profusion carrier tray.

A

B

C

D

OM10654

Figure 44. Removing the Processor Retention Bracket

A.Profusion carrier tray

B.Metal latch verification bracket

C.Tab

D.Plastic mezzanine lock bars

134

Upgrading Boardset Components

Page 134
Image 134
Intel SRPL8 manual Processor Retention Bracket Removing and Installing, Removing the Processor Retention Bracket