SRPL8 Server System Product Guide 43
I/O Device Configuration Submenu
Default values are in bold typeface.
Feature Option Description
Serial Port A Disabled
Enabled
Auto
If set to "Auto", BIOS configures the port.
Base I/O Address 3F8h
2F8h
3E8h
2E8h
Selects the base I/O address for COM port A.
Interrupt IRQ3
IRQ4 Selects the IRQ for COM port A.
Serial Port B Disabled
Enabled
Auto
If set to "Auto", BIOS configures the port.
Base I/O Address 3F8h
2F8h
3E8h
2E8h
Selects the base I/O address for COM port B.
Interrupt IRQ3
IRQ4 Selects the IRQ for COM port B.
Parallel Port Disabled
Enabled
Auto
If set to "Auto", BIOS configures the port
Mode Output only
Bidirectional
EPP
ECP
Selects the mode of the LPT port.
Base I/O Address 378h
278h
178h
3BCh
Selects the base I/O address for LPT port. 178h is only
available when the LPT port is in EPP mode. Otherwise,
3BCh is available.
Interrupt IRQ5
IRQ7 Selects the IRQ for LPT port.
DMA channel DMA 1
DMA 3 Selects the DMA channel for LPT port when configured for
ECP mode.
Floppy disk controller Disabled
Enabled
Auto
OS Controlled
Enables embedded floppy disk controller.