Problems with Application Software
If you have problems with application software, do the following:
∙Verify that the software is properly configured for the system. See the software installation and operation documentation for instructions on setting up and using the software.
∙Try a different copy of the software to see if the problem is with the copy you are using.
∙Make sure all cables are installed correctly.
∙Verify that the I/O carrier switches are set correctly. See “Configuration Switches” on page 182.
∙If other software runs correctly on the system, contact your vendor about the failing software.
∙If the problem persists, contact the software vendor’s customer service representative for assistance.
Bootable CD-ROM Is Not Detected
Check the following:
∙Is BIOS set to allow the
∙Is the peripheral bay fully seated against the chassis?
Error and Informational Messages
When you turn on the system, POST displays messages that provide information about the system. If a failure occurs, POST emits beep codes that indicate errors in hardware, software, or firmware. If POST can display a message on the video display screen, it causes the speaker to beep twice as the message appears.
162 | Solving Problems |