Page 103
System Hardware
AXXESS® ADMINISTRATOR’S GUIDE – January 2004
IP and SIP Devices
System Memory and Storage
The Model 8690 Phone ships with 128 MB of RAM and 64 MB of flash RAM. The telephone
application is pre-loaded on the device, with approximately 5 MB of RAM available to the
user.
You can view the available amount of system memory using the System Properties dialog box.
System memory is divided into Storage Memory (see caution above) and Program Memory.
Program Memory is used for executing programs.
TO VIEW SYSTEM MEMORY:
1. Press Start - Settings - Control Panel.
2. Double-press System.
3. Select the Memory tab.
NOTE: While using the Memory tab, you can re-assign the system memory. Do not perform this
procedure unless directed to do so by service personnel.
Storage Manager
Prior to shipment the Model 8690 Phone’s available 8MB of space is formatted and partitioned
using the Storage Manager (Start\Settings\Control Panel). When the 8MB of space is for-
matted, the Mounted Volume folder is created. This folder is the only location on the phone
where data and files persist across power loss and resets. The Model 8690 phone application
and its associated files reside in the Mounted Volume folder.
NOTE: While using the Storage Manager, you can reformat the file system. Do not perform this
procedure unless directed to do so by service personnel.
CAUTION
The Model 8690 Phone does not have a built-in hard drive. Storage memory will not sur-
vive a reset or an upgrade to the operating system unless the files are stored in the
Mounted Volume folder on the phone (My Computer\Mounted Volume) or on a host
that is accessible from the Model 8690 Phone. Desktop shortcuts and any preferences that
have not been saved in the registry (including UC preferences) will be lost if you upgrade
the operating system or if the phone resets.