Inter-Tel Axxess FIGURE 12. SMDR Report Format (Continued)

Page 264
System Features
AXXESS® ADMINISTRATOR’S GUIDE – January 2004
SMDR Report Format
FIGURE 12. SMDR Report Format (Continued)
START This shows the time that the call became valid (see page 261 for an explanation). For an unan-
swered ring-in, it shows the time the call began ringing. It is shown in 24-hour time (00:00 -
23:59).
ELAPSED This shows the call length from the START time (above) until disconnect or the length of time
an unanswered call was ringing. If the option is enabled that shows call duration in seconds,
calls up to 999999 seconds long appears as S=XXXXXX (XXXXXX represents the number
of seconds) and calls lasting longer than 999999 seconds appear as HH:MM (hours and min-
utes).
COST This is the approximate cost of the call ($XX.XX), based on the database information. If cost
exceeds $99.99, it is printed without the decimal point ($XXXXX). If it exceeds $99999,
$$$$$$ is shown instead. If there is no cost, the field is blank.
ACCOUNT
CODE
This is a standard, forced, or optional account code (up to 16 digits). An optional account
code overrides standard or forced account codes. The field is blank if no account code was
used.
NOTE: If an asterisk (*) appears at the end of the record, as shown in the sample, it indicates
that the call was terminated because the system detected a disconnect signal from the trunk
(that is, the caller hung up before the station user on the call).