Inter-Tel Axxess - page 183

Page 167

System Features

AXXESS® ADMINISTRATOR’S GUIDE – January 2004

User-Programmable Feature Buttons

USER-PROGRAMMABLE FEATURE BUTTONS

NOTE: This feature does not apply to single-line sets.

Individual Inter-Tel phone buttons can be designated as “user-programmable” in the keymaps

during database programming. The installer can program the default feature codes, and the sta-

tion user can reprogram the feature codes as desired. Default phone feature codes are shown on

page 84. Up to 35 user-programmable phone buttons can be programmed to enter any of the

general feature codes.

Inter-Tel display phones have a special key when the buttons are in the default state.

(However, it can be reprogrammed to use any of the Forward feature codes.) When the

button is pressed, the display shows a menu of call forwarding options. The user must then

select the desired option by pressing the corresponding button next to the display. If the

button is programmed to use any other Forward feature code (355-358), the forwarding

options will not be displayed when the button is pressed. Any Inter-Tel phone user can

make any user-programmable button a button that uses any one of the forwarding fea-

ture codes (355-358).

Secondary extension buttons (described on page 85) can be assigned to user-programmable

buttons during keymap programming. If so, the phone user can determine the primary station

that is associated with the secondary extension button by using the feature button programming

procedures given below.

TO DISPLAY THE CURRENT BUTTON ENTRIES:

1. While on hook, enter the Review Keys code (396). The display shows PRESS THE

KEY TO REVIEW.

2. Press the feature or speed-dial button(s) to be displayed. The display shows the feature,

username, or speed dial location name and KEY VALUE: (feature code, extension num-

ber, or location code). For a secondary extension button, the display shows SECOND-

ARY: (station).

TO RETURN THE BUTTONS TO DEFAULT VALUES:

While on or off hook, enter the Feature Key Default feature code (395). If off hook,

hang up. The display shows FEATURE KEYS DEFAULTED.

TO PROGRAM A FEATURE CODE IN A USER-PROGRAMMABLE BUTTON OR ASSIGN A PRIMARY STATION

TO A SECONDARY EXTENSION BUTTON:

1. While on hook, enter the Program Keys feature code (397). Display phones show

PRESS THE KEY TO PROGRAM.

2. Press the desired feature or secondary extension button. The display shows the current

feature, station, or speed dial location name and KEY VALUE: (feature, extension, or

location code).

FWD