Page 150
System Features
AXXESS® ADMINISTRATOR’S GUIDE – January 2004
Single-Line Set Displays
Display Line 2
The following criteria are used to display the number on the bottom line of the ring-in display.
This assumes that all of the necessary flags are properly set.
1. Outside Party Number provided by the Desktop Application, if available.
2. Outside Party Number provided by Caller ID, if enabled at the system-wide flag level.
3. Outside Party Number provided by ANI service, if enabled at the system-wide flag
level.
4. Number Absence Reason, such as Caller ID “OUT-OF-AREA” or “PRIVATE”
(blocked) message.
5. RINGING IN display.
ANI and Caller ID information is also sent to the voice mail application to provide the caller ’s
telephone number as part of the message envelope.
SINGLE-LINE SET DISPLAYS
System software V8.1 and later supports the transmission of Caller ID to single-line sets. This
feature uses the calling party information that the system cabinet receives from the central
office (CO). Once programmed, on-hook single-line sets display the calling party’s phone
number after the first ring when they receive an incoming CO call. The Caller ID information
is also displayed if the single-line set receives a transferred call from another station that has
calling party information.
NOTE: Caller ID is not transmitted to single-line adapters (SLAs).