Page 124
System Features
AXXESS® ADMINISTRATOR’S GUIDE January 2004
Administrator Feature Codes
The Diagnostics Mode feature code (9900) must be entered at the administrator’s station to enable system diagnostic mode before these feature codes can be used:
Program System Speed Dial 9801 Programs system-wide speed-dial numbers when followed
by location codes (000-999).
Set Network Date/Time 9810 Programs the time and date for all nodes in the system.
(Local time and date can also be reset by individual nodes.)
Set Time/Date 9800 Programs system time and date
Synchronize Network Time 9811 Synchronizes the minutes past the hour across the network.
NOTE: If a node's time is off by more than 30 minutes, syn-
chronizing the minutes may cause the hour to change. Also,
network time is automatically synchronized every day at
12:30 AM (00:30), using the time setting on the node with
the lowest number.
FEATURE NAME CODE DEFINITION
FEATURE NAME CODE DEFINITION
Diagnostic - ASAI Snoop Off 9926 This feature code turns off the ASAI output to Message
Print. ASAI is the protocol the system uses to talk to Data-
base Programming and the AVDAP. Turning this feature on
helps the Inter-Tel Engineers debug the messaging
between Call Processing and Database Programming or
Call Processing and the AVDAP.
Diagnostic - ASAI Snoop On 9927 This feature code turns on the ASAI output to Message
Print. ASAI is the protocol the system uses to talk to Data-
base Programming and the Voice Processor. Turning this
feature on helps the Inter-Tel Engineers debug the mes-
saging between Call Processing and Database Program-
ming or Call Processing and the AVDAP.
Diagnostic - Heap Dump 9943 This is used by Inter-Tel software developers and cannot
be used in Beta or Production software.
Diagnostic - Dump Extension 9933 Allows an Inter-Tel field technician to dump out a device or
structure when debugging a problem. The system dumps
the internal data structures for that extension to message
print. If you press the pound button (#) you are prompted
for a command. The command allows you to enter an
alphanumeric string of the structure to dump.