Page 193
System Features
AXXESS® ADMINISTRATOR’S GUIDE January 2004
On-Hook Monitoring
ON-HOOK MONITORING
An Inter-Tel phone user with a speakerphone can monitor the call (listen to a recorded mes-
sage, wait for the call to be answered, or wait on hold), and then speak handsfree when
answered.
TO USE ON-HOOK MONITOR:
1. While on a call, press the Speaker button and hang up. If you do not want to be heard
and if the MUTE button is not lit, press the button or MUTE menu button, or
press the Special button and enter the Microphone Mute On/Off feature code (314). You
can hear the other party (if the microphone is muted, you cannot be heard). The Speaker
button is lit (and the button is lit if the microphone was muted).
2. To return to the conversation: You may lift the handset or speak handsfree. (If the
microphone was muted, press the lit button or the UNMUTE menu button to
speak. The button goes off.)
GROUP LISTEN FEATURE
The Group Listen feature allows an Inter-Tel phone user to transmit a conversation over the
phone speaker while in handset or headset mode. This allows other people in the room to listen
to the conversation. However, the phone microphone remains disabled so that only the headset
or handset user can speak.
This feature cannot be used on a handsfree call. The user must be on a call using the handset or
a headset before entering the feature code. Group Listen cannot be used on single-line sets.
TO TURN THE GROUP LISTEN FEATURE ON OR OFF DURING A CALL:
While on a call using the handset or a headset, press the Special button and enter the
Group Listen feature code (312). You hear a confirmation tone, and the display shows
GROUP LISTEN ON or GROUP LISTEN OFF. (The other party will not hear the
confirmation tone.)
NOTE: If using a headset on a Model 8500, 8520, or 8560 Phone when Group Listen is
enabled, the volume control adjusts the volume of the headset, not the speaker.
When the Group Listen feature is active in handset mode, the Speaker button lamp will remain
unlit. This allows the user to place the call into handsfree mode at any time during the call by
pressing the Speaker button. When the feature is active in headset mode, the Speaker lamp is
lit. Pressing the button will disconnect the call.
The Group Listen feature code can be programmed under a feature button or DSS/BLF button
just like any other feature. The button functions as a toggle. If the button has a lamp, it is lit
when the feature is activated and unlit when the feature is turned off.
If the Group Listen feature is active when an OHVA call is received by the phone, the OHVA
call will camp on (because the speaker is busy).
MUTE
MUTE
MUTE
MUTE