Page 242
System Features
AXXESS® ADMINISTRATOR’S GUIDE – January 2004
House PhoneThere is a flag, called “House Phone Mode,” that affects single-line house phones. The house phone can be programmed to return to dial tone after a call is disconnected (normal mode). This allows the user to enter a feature code or place a call. Or, the dial tone can be disabled (restricted mode) to prevent the user from performing any operation other than placing a house-phone call. In the default state, this is normal. The interaction of the House Phone Mode flag with the programmed speed-dial number and system feature is shown below.
SITUATION DAY/NIGHT # NORMAL MODE RESTRICTED MODE
House phone user lifts the
handset
Complete
extension
Dials the extension number Dials the extension number
House phone user lifts the
handset
Blank User receives intercom dial tone User receives reorder tone
House phone user lifts the
handset
Incomplete
extension
number
System dials the partial number
and waits for further digits
System dials partial number, then
times out after Long Interdigit
timer expires, and sends reorder
tones
House phone is connected
to ARS, and the user per-
forms a hookflash
Dials an out-
side number
using ARS
System inserts a hookflash in the
number and registers end-of-dial-
ing
System restarts ARS by clearing
the number and returns outside
dial tone to the user
House phone is connected
to an outside call, and the
user performs a hookflash
N/A The call is p laced on consultation
hold, and the user hears intercom
dial tone
The trunk dials a hookflash, and
toll restriction is restarted
Party the house phone is
connected to hangs up
before the house phone
user
N/A User receives intercom dial tone
and can use another feature code
or dial a number
System redials the house phone
digits after the SL Wait for Discon-
nect timer expires