Page 244
System Features
AXXESS® ADMINISTRATOR’S GUIDE January 2004
Using the Last Number Saved Feature
USING THE LAST NUMBER SAVED FEATURE
Use the following procedures to save and redial numbers at stations that are programmed to
use the Last Number Saved feature.
TO SAVE A NUMBER ON A STATION PROGRAMMED FOR LAST NUMBER SAVED:
NOTE: The saved number is replaced each time you repeat this procedure.
Inter-Tel Phones: While the phone is idle or while listening to intercom dial tone,
press the button, or press the Special button and enter the Redial feature code
(380). You hear a confirmation tone, and the display shows LAST OUTSIDE NUM-
BER SAVED.
Single-Line Sets: Lift the handset and enter the Redial feature code (380). When you
hear the confirmation tone, hang up.
TO REDIAL A NUMBER (LAST NUMBER SAVED):
Inter-Tel Phones: While on a call or after selecting a trunk, press the button,
or press the Special button and enter the Redial feature code (380). Refer to the chart
on the previous page to determine which trunk is selected. The saved telephone num-
ber is dialed.
Single-Line Sets: While on a call or after selecting a trunk, hookflash and then enter
the Redial feature code (380). Refer to the chart on the previous page to determine
which trunk is selected. The saved telephone number is dialed.
USING THE LAST NUMBER DIALED FEATURE
Use the following procedure to redial numbers at stations that are programmed to use the Last
Number Dialed feature.
TO REDIAL A NUMBER (LAST NUMBER DIALED):
Inter-Tel Phones: While on or off hook, press the button, or press the Special
button and enter the Redial feature code (380). Refer to the chart on the previous page
to determine which trunk is selected and which digits are dialed.
Single-Line Sets: Lift the handset or hookflash. Then enter the Redial feature code
(380). Refer to the chart on the previous page to determine which trunk is selected and
which digits are dialed.
REDIAL
REDIAL
REDIAL