Page 163
System Features
AXXESS® ADMINISTRATOR’S GUIDE – January 2004
Security Codes
Security Codes
DISA trunks can be assigned security codes (up to eight digits in length) that are required for
access to the system. The installer can program separate codes for each DISA trunk group to be
used during day and/or night modes.
NOTE: To prevent unauthorized access to the outgoing trunks, all trunk groups using DISA
should have a security code.
During database programming, the programmer can determine the number of times that a
caller may unsuccessfully attempt to enter a security code and/or dial an extension number. If
the user does not succeed within the determined number of attempts, the call will be discon-
nected (if the security code is invalid) or transferred to the primary attendant (if the extension
number is invalid).
Using DISA
NOTE: If DTMF decoders are unavailable when a DISA call is received, the incoming DISA call
is automatically sent to the primary attendant.
TO USE DISA:
1. From a DTMF telephone, dial the telephone number of the DISA trunk. When the call
is answered by the system, you hear system intercom dial tone.
If you hear a single progress tone, enter the appropriate (day or night) DISA security
code, followed by pound (#).
2. Dial an extension number or a hunt group pilot number. (To call the primary attendant,
dial 0.) You hear music or ringing until the call is answered.
DISA
Caller dials DISA
number, hears
dial tone, and
enters password
(if required)
Axxess
Caller can dial a Voice Processor,
station, or hunt group extension
number
1
2