Page 16
Administrator Procedures
AXXESS® ADMINISTRATOR’S GUIDE January 2004
Station Programming
c. Toll Restriction: This option allows you to set the station class of service for day
and/or night modes. To select it, press or the TOLL RESTRICTION menu but-
ton. Then do the following:
1. The display shows TOLL RESTRICTION OPTION. Press or the COS
DAY menu button to program day mode toll restriction. Or, press or the
COS NIGHT menu button to program night mode toll restriction.
2. The display shows SET DAY (or NIGHT) COS XX. If this is not the COS
you wish to program, scroll to the correct COS by pressing the high end of the
Volume button or NEXT to scroll forward, or press the low end of the Volume
button or PREVIOUS to scroll backward. The default COS numbers are as
follows. See page 155.
COS 01 – ARS Only
COS 02 – Deny Area/Office
COS 03 – Deny Operator
COS 04 – Deny Toll Access
COS 05 – Deny International
COS 06 – Deny Equal Access
COS 07 – Deny Local Calls
COS 08 – Denied Numbers
COS 09 – Allowed Numbers
3. When the correct COS is displayed, press or the ON menu button to
enable the toll restriction. Or, press or the OFF menu button to disable it.
4. If desired, repeat steps c2 and c3 to program additional COS toll restrictions.
5. Press or ACCEPT to save the COS programming. The display shows
DATABASE UPDATED and then returns to the TOLL RESTRICTION
OPTION prompt.
6. Press again to exit to the ENTER STATION OPTION prompt.
6. When the display shows ENTER STATION OPTION, press again to exit to the
ENTER STATION EXTENSION prompt. You can then program another station by
repeating these steps or press or ACCEPT once more to exit to the ENTER DATA-
BASE OPTION prompt.
7. When finished with all programming, press while the ENTER DATABASE
OPTION prompt is displayed. This ends the programming session.
8. If a system reset is required, the display shows ENTER SYS RESET OPTION. Do one
of the following:
Delayed Reset: Press or the DELAYED menu button to delay the reset. The
display shows DELAYED RESET SCHEDULED. The system will be reset at the
pre-programmed time.
Immediate Reset: Press or the IMMEDIATE menu button to reset the system
now.
NOTE: A system reset will drop all calls in progress.
3
1
2
1
2
#
#
#
#
#
1
2