Inter-Tel Axxess

Page 27

Administrator Procedures

AXXESS® ADMINISTRATOR’S GUIDE – January 2004

Trunk Programming

Answer Access For Day Or Night Mode: To program the station(s) that will have

answer access for this trunk group for day mode, press or the ANS-ACCESS

DAY menu button. To program for night mode, press or the ANS-ACCESS

NIGHT menu button. When the display shows ENTER STATION EXTENSION,

do the following:

1. Enter a station extension using one of the methods described on page 25.

2. The display shows the extension number and a Yes/No prompt. Press or

the YES menu button, followed by , to include the station in the list. Or,

press or the NO menu button, followed by , to exclude the station from

the list.

3. When the display returns to ENTER STATION EXTENSION, select another

extension number. Or, if finished programming the station list, press or

ACCEPT to continue.

Ring-In For Day Or Night Mode: To program the station that will have ring in for

this trunk group for day mode, press or the RING-IN DAY menu button. To

program for night mode, press or the RING-IN NIGHT menu button. When the

display shows ENTER STATION EXTENSION, enter stations into the list one at a

time as described above for Answer Access.

Toll Restriction: To program the toll restrictions for the trunk group, press or

the TOLL RESTRICTION menu button. When the display shows TOLL

RESTRICTION OPTION, press the numbers that correspond to the toll restrictions

you wish to program, as follows:

1. COS for day or night mode: To program the toll restriction class of service for

day mode, press or the COS DAY menu button. To program class of ser-

vice for night mode, press or the COS NIGHT menu button. The display

shows SET DAY (or NIGHT) COS XX. If this is not the COS you wish to

program, scroll to the correct COS by pressing the high end of the Volume

button or the NEXT menu button to scroll forward, or press the low end of the

Volume button or the PREVIOUS menu button to scroll backward. The

default COS numbers are listed below. (See page 155 for definitions. COS 01

is not used for trunks.) When the correct COS is displayed, press or the

ON menu button to enable the toll restriction. Or, press or the OFF menu

button to disable it. If desired, repeat this step to program additional COS toll

restrictions. Then press or ACCEPT to continue.

COS 02 – Deny Area/Office

COS 03 – Deny Operator

COS 04 – Deny Toll Access

COS 05 – Deny International

COS 06 – Deny Equal Access

COS 07 – Deny Local Calls

COS 08 – Denied Numbers

COS 09 – Allowed Numbers

2. Exempt from ARS: To program the Exempt from ARS option, press or the

EXEMPT FROM ARS menu button. When the display shows EXEMPT

FROM ARS, press or the YES menu button to enable the option. Or,

press or the NO menu button to disable it. Then press or ACCEPT to

continue.