Page 187
System Features
AXXESS® ADMINISTRATOR’S GUIDE January 2004
Off-Hook Voice Announce (OHVA)
OFF-HOOK VOICE ANNOUNCE (OHVA)
The Off-Hook Voice Announce (OHVA) feature allows an intercom caller (either single-line
set or Inter-Tel phone) to establish voice contact with the called Inter-Tel phone user, even
though the user already has a call in progress on the handset. The called phone user can then
talk freely on both connections, using the handset for the original call and the speakerphone for
the OHVA intercom call. Note that the caller on the handset call will be able to hear the OHVA
call.
In a network, intercom callers can establish OHVA calls to Inter-Tel phones on other nodes.
A PC Data Port Module (PCDPM) must be installed on a digital display phone to provide the
secondary voice path needed for the OHVA feature. The analog phones and Executone IDS
Phones do not require any additional equipment.
NOTE: IP and SIP endpoints do not support OHVA.
To enable the OHVA, the following must be completed:
The OHVA system flag must be enabled. (When the system is in the default state, this
flag is enabled.)
Each OHVA-equipped Inter-Tel phone can be programmed for placing and/or receiving
OHVA calls. (By default, OHVA is disabled at the station level.)
Other Inter-Tel phones and single-line sets can be programmed for placing OHVA calls,
as desired. Inter-Tel phones without PC Data Port Modules or secondary voice paths,
and single-line sets cannot receive OHVA calls since they do not have secondary voice
path circuitry. (By default, OHVA is disabled at the station level.)
DSS/BLF-equipped digital display phones can be programmed to override the Camp-
On and OHVA Screening timers and make “immediate” OHVA calls. This is a useful
option for attendant stations.
Any combination of OHVA-enabled and -disabled stations is available through database pro-
gramming. For example, all attendants may be programmed to make, but not receive, OHVA
calls, while other stations are allowed to receive, but not place, OHVA calls.
OHVA calls cannot be processed if the secondary voice path or the speakerphone of the called
phone is not available. This occurs when the phone has a different OHVA call in progress, has
an active data call in progress, is on an active handsfree intercom or outside call, has handsfree
disabled, has a call being changed from handset to speakerphone, has a headset enabled, or is
in Do-Not-Disturb. Also, OHVA calls are not possible if the caller is placing a private intercom
call or has the Ring Intercom Always feature enabled.
NOTE: To place an OHVA call using a single-line set, the Ring Intercom Always feature must
be disabled. To disable this feature, lift the handset and dial 377 (Ring Intercom Always ON/
OFF feature code) on the single-line set. By default, this is enabled.
If you press the button while speaking to an off hook voice announce caller on the
speakerphone, the handset microphone will be muted and the caller on the handset will not
hear you or the OHVA caller. When you press again, the handset microphone is re-
enabled.
MUTE
MUTE