Changing the Settings for the 8411 Telephone
TSelect a ringing preference for an incoming call when you are busy on another call (the default is Continuous Ringing)
Setting: | 0 | - No Ring |
| 1 | - One Ring |
| 2 | - Continuous Ringing |
Enable or disable the status lights (next to Button #9) for the PassageWay interface (the default setting is Status Lights disabled)
Setting: 1 - Enable the status lights
2 - Disable the status lights
NOTE:
By default, Button #9 is enabled for use by the PassageWay status lamp. It is in your best interest to disable this button (using the SHIFT MUTE code listed above). By disabling the default setting for this button, you gain one more feature button that you
Tcan program.
Enable or disable the status lights (next to Button #10) for the Analog (Tip/Ring) Adjunct connected to the Analog Adjunct jack (the default setting is Status Lights disabled)
Setting: 1 - Enable the status lights
2 - Disable the status lights
NOTE:
By default, Button #10 is enabled for use by the analog line status lamps. It is in your best interest to disable this button (using the SHIFT MUTE code listed above). By disabling the default setting for this button, you gain one more feature button that you can program.
