Installing and Configuring Telephony
Manager
19.Choose the OK button.
Depending on your version of Windows, Connect or the Pumpware Module verifies the PassageWay link. While the PassageWay link is verified, the mouse arrow becomes an hourglass. When Connect or the Pumpware Module is finished verifying the link, the hourglass becomes an arrow again. The PassageWay link verification message box remains on your screen. Proceed to Step 20.
20.If you are using Windows 95, click on the Connect button on the bottom of your screen to open the Connect window, and then select Exit from the File menu in Connect to close Connect.
If you are using Windows NT, select Exit from the File menu in the Pumpware window to close the Pumpware Module.
The View README File dialog box appears. If you want to view the Readme file now, make sure the check box is selected. (This check box is selected by default.) If you do not want to view the Readme file now, make sure the check box is not selected.
21.Choose the Finish button.
If the Readme file check box was selected, the Notepad window appears, displaying the contents of the Readme file. Proceed to Step 22.
If the Readme file check box was not selected, the About To Restart Windows message box appears. Proceed to Step 23.
22.When you are finished reading the Readme file, select Exit from the File menu to close the Notepad window.
NOTE:
If you have any other Notepad windows open, you must close all of them now. The installation will not continue until all Notepad windows are closed.
The About To Restart Windows message box appears.
