Lucent Technologies Comcode 108239393 manual

Installing and Configuring Telephony

Manager

This dialog box presents a representation of the buttons on your telephone.

If your company has a DEFINITY G3 V5 or later system, the PassageWay Configurator can automatically download the following information for your telephone from the DEFINITY system via the Auto Config button:

⎯the location and type (that is, primary line, bridged line, or monitored line) of call appearances on your telephone.

⎯the location of features assigned to buttons on your telephone.

⎯the feature access codes for certain features that are not programmed as buttons on your telephone.

If you want to configure your telephone automatically via the

Auto Config button, you must:

⎯have a display telephone. However, you can use a non-display telephone if your company’s DEFINITY System Manager administers your extension as a display telephone. Consult your DEFINITY System Manager. If you have a non-display telephone, you must also use the Advanced button in the Telephone Options dialog box to specify that your extension has display capabilities even though your telephone does not have a display.

⎯know the PASTE feature access code for your DEFINITY system. You must contact your DEFINITY System Manager for this feature access code.

⎯have a Next feature button administered on your telephone, depending on your type of telephone. If you have a 7400 Series telephone, an 8400 Series telephone, or a Callmaster telephone other than a Callmaster VI, you must have a Next feature button administered on your telephone. However, if you have a Callmaster VI telephone, you do not need a Next feature button administered on your telephone.

2-35