Installing and Configuring Telephony

Manager

Before You Begin

This section describes the information that is required to install and configure the PassageWay Service Provider.

If your company has a DEFINITY G3 V5 or later system, you can download the configuration information for your telephone from the DEFINITY system automaticallyT. However, to use this feature, you must:

have a display telephone. However, you can use a non-display telephone if your company’s DEFINITY System Manager administers your extension as a display telephone. Consult your DEFINITY System Manager. If you have a non-display telephone, you must also use the Advanced button in the Telephone Options dialog box to specify that your extension has display capabilities even though your telephone does not have a display.

NOTE:

You cannot automatically download the configuration information for your telephone if you have a 6402 telephone or a 6402D telephone.

know the PASTE feature access code for your DEFINITY system. You must contact your DEFINITY System Manager for this feature access

Tcode.

have a Next feature button administered on your telephone, depending on your type of telephone. If you have a 6400 Series telephone without a display, a 7400 Series telephone, an 8400 Series telephone, or a Callmaster telephone other than a Callmaster VI, you must have a Next feature button administered on your telephone. However, if you have a Callmaster VI telephone or a 6400 Series telephone with a display, you do not need a Next feature button administered on your telephone.

2-12

Page 30
Image 30
Lucent Technologies Comcode 108239393 manual Before You Begin