Installing and Configuring Telephony
Manager
If you do not have a Callmaster VI telephone, the Phone Line Information dialog box appears, displaying the locations of all call appearances and feature buttons on your telephone. You cannot change any of this information during this session. To change this information, you must restart the PassageWay Configurator. Proceed to Step h.
h.Choose the Continue button.
The Feature Access Codes dialog box appears, displaying the feature access codes for your DEFINITY system. You cannot change any of this information during this session. To change this information, you must restart the PassageWay Configurator.
i.Choose the Continue button.
The PassageWay Configurator - Complete message box appears.
j.Proceed to Step 16.
5.Choose the location of a call appearance on your telephone.
A submenu appears displaying “Clear Button,” “Primary Line,” “Bridged Line,” “Monitored Line,” and “Cancel.”
NOTE:
Make sure you specify the correct location and type of each call appearance on your telephone. If you incorrectly specify any of this information, your system will not work as expected.
6.Choose the appropriate type of call appearance for the selected button.
If you select Clear Button, the programming (if any) and label (if any) are removed from that button.
If you select Cancel, the submenu closes, and the programming for the selected button is not changed.
