Lucent Technologies Comcode 108239393 manual

Installing and Configuring Telephony

Manager

If you have not configured the Dialing Properties for your PC previously, a message box appears, prompting you to configure your dialing locations. Choose the OK button. The Dialing Properties dialog box appears. Perform Steps 3 to 9 in the next section “Configuring the Dialing Information” to configure your dialing locations and then perform the steps in this procedure.

5.In the Number of telephone lines available box, enter the number of primary call appearances on your telephone.

6.In the Minimum or default number of lines to be displayed box, enter the minimum number of call appearances you want displayed in the Telephony Manager window. These call appearances will be displayed even when there are no calls appearing at your telephone.

7.Select the Turn On Auto-Sizingcheck box to enable or disable the Auto-Sizing feature. A check mark in the Turn On Auto-Sizingcheck box indicates that the Auto-Sizing feature is enabled.

If you want the size of the Telephony Manager window to change automatically as you make and receive calls, enable the Auto-Sizing feature and make sure the Call Appearance area is not maximized (using the Maximize/Minimize Call Appearance Area button in the Telephony Manager window).

If you do not want the size of the Telephony Manager window to change automatically as you make and receive calls, disable the Auto-Sizing feature. If you want to view all of the call appearances, you must maximize the Call Appearance area (using the Maximize/Minimize Call Appearance Area button in the Telephony Manager window).

2-72