Lucent Technologies Comcode 108239393 manual Connecting Your Callmaster VI Telephone to Your PC

Installing and Configuring Telephony

Manager

Connecting Your Callmaster VI Telephone to

Your PC

This section describes how to connect a Callmaster VI telephone to your PC. Only perform the steps in this section if you have a Callmaster VI telephone. Otherwise, see “Connecting Your 8411 Telephone to Your PC” or “Installing the PassageWay Adapter.”

The 9-pin to 9-pin serial cable connects your PC and your Callmaster VI telephone, enabling you to access the DEFINITY system from your PC. This cable has a 9-pin connector for 9-pin serial ports. If you have a 25-pin serial port on your PC, use the 9-pin to 25-pin cable to connect your Callmaster VI telephone to your serial port.

To connect your telephone to your PC:

1.Turn off your PC.

2.Determine the type of serial port (9 pin or 25 pin) you have on your PC. If you have a 9-pin serial port, you will use the 9-pin to 9-pin serial cable. If you have a 25-pin serial port, you will used the 9-pin to 25- pin serial cable.

3.Connect the 9-pin connector of the serial cable to the 9-pin connector on the back of your Callmaster VI telephone.

4.Connect the other end of the serial cable to the serial (COM) port on your PC.

5.Turn on your PC.

Proceed to “Installing the PassageWay Service Provider Software.”

2-17