Installing and Configuring Telephony
Manager
If you are using Windows NT and the check box was selected, the Pumpware Module starts, verifies the PassageWay link, and then checks the firmware version. If the firmware is current, the Pumpware window appears. Proceed to Step 20.
If the firmware is not
If the check box was not selected, the View README file dialog box appears. If you want to view the Readme file now, make sure the check box is selected. (This check box is selected by default.) If you do not want to view the Readme file now, make sure the check box is not selected. Proceed to Step 21.
17.Choose the Yes button to update the PassageWay firmware now.
A dialog box appears, stating that the PassageWay firmware is about to be downloaded.
NOTE:
You will be unable to make or receive any calls during the download. The download process takes several minutes.
18.Hang up any calls that are on your telephone, and then choose the OK button.
The firmware is downloaded to the PassageWay adapter. A window displays the status of the download. The download process takes several minutes.
If the download was successful, a message box appears, stating that the download was successful.
If the download was unsuccessful, a dialog box appears, stating that an error occurred during the procedure and prompting you to repeat the download procedure. Choose the Retry button and repeat the download procedure.
