Lucent Technologies Comcode 108239393 manual

Installing and Configuring Telephony

Manager

Tany of the following telephones if you want to use Telephony Manager with a DEFINITY system:

⎯6400 Series telephones

⎯7400 Series telephones

⎯8400 Series telephones

⎯Callmaster® Series telephones

NOTE:

A complete list of all the telephones supported by the PassageWay Service Provider is provided in the PassageWay Service Provider software (also known as the “PassageWay Configurator”).

For caller ID capabilities, your telephone must have:

⎯a display. However, you can use a non-display telephone for caller ID capabilities if your company’s DEFINITY System Manager administers your extension as a display telephone. Consult your DEFINITY System Manager.

⎯an Inspect button and a Normal button programmed. The Inspect button is a display feature button that shows you call-related information for an incoming call when you are already active on a call. The Normal button is a display feature button that clears the information displayed by the Inspect button. The Normal button is not required if you have an 8411 telephone.

2-8