Lucent Technologies Comcode 108239393 manual

Installing and Configuring Telephony

Manager

If your company has a DEFINITY G3 V5 or later system, the PassageWay Configurator can automatically download the following information for your telephone from the DEFINITY system via the Auto Config button:

⎯the location and type (that is, primary line, bridged line, or monitored line) of call appearances on your telephone.

⎯the location of features assigned to buttons on your telephone.

⎯the feature access codes for certain features that are not programmed as buttons on your telephone.

If you want to configure your telephone automatically via the Auto Config button, you must:

⎯have a display telephone. However, you can use a non-display telephone if your company’s DEFINITY System Manager administers your extension as a display telephone. Consult your DEFINITY System Manager. If you have a non-display telephone, you must also use the Advanced Options dialog box to specify that your extension has display capabilities even though your telephone does not have a display

NOTE:

You cannot automatically download the configuration information for your telephone if you have a 6402 telephone or a 6402D telephone.

⎯know the PASTE feature access code for your DEFINITY system. You must contact your DEFINITY System Manager for this feature access code.

2-53