Lucent Technologies Comcode 108239393 manual PassageWay Telephony Manager Components

Installing and Configuring Telephony

Manager

PassageWay Telephony Manager

Components

TelephonyTManager consists of the following components:

a CD-ROM

NOTE:

If you require 3-1/2” diskettes, please contact the PassageWay Fulfillment Center at 860 434-3961 and request the diskette version of software for Telephony Manager R2.

this guide (A PDF version of this guide is located in the Getting Started Guide directory on the CD-ROM. Consult the Readme file in this directory for more information.)

PassageWay Telephony Manager

Requirements

Telephony Manager requires the hardware and software listed below. Note that system performance may be adversely affected by lower system speeds and Tlower memory capacities.

an IBM PC-compatible or PS/2®-compatible PC with the following hardware:

⎯an 80486/66DX or higher processor

⎯an available serial port

⎯a minimum of 16 MB of RAM

⎯a 3.5-inch, 1.44-MB, high-density diskette drive or CD-ROM drive

⎯a hard disk with at least 25 MB of space available

⎯a VGA or better monitor

2-6